All in One Stroke A robust 10-station tool head which allows you to “Do It All” Station 1: Case feeding Station 2: Sizing and decapping Station 3: Swage/Case trim Station 4: Primer seat Station 5: Case flare/neck expansion Station 6: Powder drop Station 7: Powder check Station 8: Bullet Dropper Station 9: Seating Station 10: Crimping *The above is just one possible set-up. The 10 station tool head offers a large variety of options for all your reloading and case processing needs. Upgradeability The APEX 10 can easily be upgraded withthe following options: Autodrive Primer Xpress – Electronic Oscillating Primer System Digital Powder Measure (only with Autodrive) Digital Sensors (only with Autodrive) Machine caliber conversion kits that include everything required to convert the press from one caliber to another Trimmer kit for rifle processing Features of Mark 7 Reloading Apex 10 Manual Press: Dimensions: 36″ Tall, 15″ Wide, 11″ Deep Number of Stations: 10 Caliber Range: 380 up to .308 Drive System: Manual Priming System: Shuttle Disk Stacked Priming System Case Feeder: 11″ High Speed Case Feeder Powder Measure: Mechanical Powder Measure Machine Weight: ~70 lbs Mark 7 APEX 10 Standard Package Includes: 11″ Case Feeder with variable speed motor Mechanical Powder Measure 10-station cast iron tool head Ergonomically designed operating handle,which can be assembled for right or left-hand use Shuttle Disk Stacked Priming System Small and Large Primer & Swaging Components included Lyman Stainless Steel Pro Hold-Down Die Double Guide Rod support for the tool head for more stability Package Contents: Mark 7 Reloading Apex 10 Manual Press
Mark 7 Reloading Apex 10 Manual Press
2279 $
Description
Reviews (0)
Related products
Hornady Lock-N-Load Classic Reloading Press
214 $
The Hornady Lock-N-Load Classic Loader 085001 lets you switch dies to a new caliber and begin reloading again in seconds. The Automatic priming on the Lock-N-Load Loader by Hornady is hands-off and trouble free. The Hornady Classic Reloader has an angled frame that allows you better access to your cartridges. The Bushings on the Hornady Lock-N-Load System lets you adjust all of your dies at once, for consistent reloads every time. The Lock-N-Load Classic Loader by Hornady comes equipped with CNC machined die and ram openings to create the ideal alignment of the ram and die, making it so the cases are lined up properly with the dies. This Hornady Gunsmith and Reloading Tool creates precision that translates into more efficient accuracy. The strong, rigid frame also provides the Hornady Lock N Load Reloading System with the stability you need for perfect reloading. With the Lock-N-Load Classic Loader by Hornady, one press can handle multiple calibers with ease. Your dies will remain exactly as you set them, within their Hornady Lock-N-Load Die Bushings. Specifications for Hornady Lock-N-Load Classic Loader 085001: Weight: 12.25 Lbs Features of Hornady Lock-N-Load Classic Loader 085001: Adjust all your pins at the same time Angled frame for better cartridge access Package Contents: Hornady Lock-N-Load Classic Loader 085001
Hornady LNL Ap Rifle Bullet Feeders
508 $
The Hornady LockNLoad Rifle Bullet Feeder (22 cal.) allows you to fashion your reloading press into a bunch-mounted ammo factory. The Hornady Lock-N-Load® Rifle Bullet Feeder is designed for the Lock-N-Load® AP™ reloading press. Sold as a complete unit for 22 caliber bullets,a conversion kit for 30 caliber bullets is also available, giving the reloader the versatility to load the two most popular calibers. Plus, it's compatible with other presses and uses the industry standard 7/8"-14 die threads. The 22 caliber kit accommodates cartridge sizes from .221 Fireball through 22-6mm. The 30 caliber conversion kit will accommodate cartridge sizes from 300 Savage through 300 Rem Ultra Mag. Coupled with the Lock-N-Load® Case Feeder, you'll realize dramatic increases in efficiency and reloading speed - up to 50% faster (based on experience and proficiency). The Hornady Bullet Feeder Die is case activated; the bullet will only feed upon contact with the case. One station is used to feed, seat and crimp the bullet. Specifications for Hornady LNL Ap Rifle Bullet Feeders: Manufacturer: Hornady Quantity: 1 Condition: Factory DEMO, New Color: Black Package Contents: Hornady LNL Ap Rifle Bullet Feeder
Area 419 Zero Reloading w/7/8 Turret Head
1275 $
One of the beautiful parts of the ZERO is the ability to set up dies and not remove them, simply rotate or replace your turret to get to another die. With the addition of extra turrets there is virtually no limit to the number of calibers you can set up to run on the ZERO, and changing a turret takes about 20 seconds. Turret replacement is also repeatable to under .001?. All turrets will come with a press-fit pull-stud, and die stations laser marked with a number on the outer diameter of the head. Specifications for Area 419 Zero Reloading w/7/8 Turret Head: Manufacturer: Area 419 Fabric/Material: Steel Weight: 5 lb Condition: New Color: Black Package Contents: Area 419 Zero Reloading w/7/8 Turret Head
Area 419 Zero Locking Die Ring 7/8in Multi Pack
100 $
All Multi-Packs include multiple rings and a die wrench. Finish on all multi-packs will be black nitride. Wrenches are aluminum, so the finish is a black hardcoat anodize. Specifications for Area 419 Zero Locking Die Ring 7/8in Multi Pack: Manufacturer: Area 419 Quantity: 1 Length: 7/8 in Weight: 5 lb, 1 lb Fabric/Material: Aluminum Dimensions: 8 x 8 x 4 in Color: Black Nitride Finish: Hard Coat Anodized Package Contents: Area 419 Zero Locking Die Ring 7/8in Multi Pac
Reviews
There are no reviews yet.