All in One Stroke A robust 10-station tool head which allows you to “Do It All” Station 1: Case feeding Station 2: Sizing and decapping Station 3: Swage/Case trim Station 4: Primer seat Station 5: Case flare/neck expansion Station 6: Powder drop Station 7: Powder check Station 8: Bullet Dropper Station 9: Seating Station 10: Crimping *The above is just one possible set-up. The 10 station tool head offers a large variety of options for all your reloading and case processing needs. Upgradeability The APEX 10 can easily be upgraded withthe following options: Autodrive Primer Xpress – Electronic Oscillating Primer System Digital Powder Measure (only with Autodrive) Digital Sensors (only with Autodrive) Machine caliber conversion kits that include everything required to convert the press from one caliber to another Trimmer kit for rifle processing Features of Mark 7 Reloading Apex 10 Manual Press: Dimensions: 36″ Tall, 15″ Wide, 11″ Deep Number of Stations: 10 Caliber Range: 380 up to .308 Drive System: Manual Priming System: Shuttle Disk Stacked Priming System Case Feeder: 11″ High Speed Case Feeder Powder Measure: Mechanical Powder Measure Machine Weight: ~70 lbs Mark 7 APEX 10 Standard Package Includes: 11″ Case Feeder with variable speed motor Mechanical Powder Measure 10-station cast iron tool head Ergonomically designed operating handle,which can be assembled for right or left-hand use Shuttle Disk Stacked Priming System Small and Large Primer & Swaging Components included Lyman Stainless Steel Pro Hold-Down Die Double Guide Rod support for the tool head for more stability Package Contents: Mark 7 Reloading Apex 10 Manual Press
Mark 7 Reloading Apex 10 Manual Press
2279 $
Description
Reviews (0)
Related products
Hornady 366 Auto Shotshell Reloaders
1429 $
If you're an avid trap, skeet, sporting clays shooter or devoted bird hunter, what could be better than a day in the field? Certainly not a day at your reloading table. Which is why Hornady created the 366 Auto, a machine that cranks out low-cost reloads in a hurry, so you can spend more time shooting. It's easy. All you do is set in an empty case and wad, and then pull the operating lever. Everything else is done for you-automatically. Every stroke turns out a precisely crimped shell, fully resized to factory dimensions. The 366 Auto features full-length resizing, automatic primer feed, swing-out wad guide, three-stage Taper-Loc crimping, automatic advance to the next station, automatic ejection and one primer tube filler. Additional die sets are available in 12, 20, and 28 gauge. This Hornady 366 reloading press is sized for 12 Ga. Specifications for Hornady 366 Auto Shotshell Reloaders: Manufacturer: Hornady Quantity: 1 Condition: New Package Contents: Hornady 366 Auto Shotshell Reloader
Area 419 Zero Reloading w/7/8 Turret Head
1275 $
One of the beautiful parts of the ZERO is the ability to set up dies and not remove them, simply rotate or replace your turret to get to another die. With the addition of extra turrets there is virtually no limit to the number of calibers you can set up to run on the ZERO, and changing a turret takes about 20 seconds. Turret replacement is also repeatable to under .001?. All turrets will come with a press-fit pull-stud, and die stations laser marked with a number on the outer diameter of the head. Specifications for Area 419 Zero Reloading w/7/8 Turret Head: Manufacturer: Area 419 Fabric/Material: Steel Weight: 5 lb Condition: New Color: Black Package Contents: Area 419 Zero Reloading w/7/8 Turret Head
Area 419 Zero Reloading Press Extra Turret with 7/8 Head
202 $
The Area 419 Zero Reloading Press Extra Turret allows you to set your turrets up so that you can use a specific caliber on a specific press, instead of changing out dies. This turret by Area 419 increases the press' ability to hold more than one caliber while allowing the user to quickly change calibers by rotating the turret - which reduces set-up time. Another great aspect of the Area 419 Zero Reloading Press Extra Turret is that it is easily replaced in approximately 20 seconds. By removing and re-installing the turret, not only do you get to use different calibers on the same press - which prevents set-up time - but also increases the number of calibers you can use on a particular press. The reason this is a particularly good deal is because the Area 419 Zero Reloading Press Extra Turret with 7/8" Head easily switches between presses - a feature that has rarely been seen on presses of this type - until now. Specifications for Area 419 Zero Reloading Press Extra Turret with 7/8 Head: Manufacturer: Area 419 Fabric/Material: Aluminum Weight: 5 lb Color: Black Package Contents: Area 419 Zero Reloading Press Hybrid Turret
Reviews
There are no reviews yet.